– the body “JV43”,

– support foot,

– side support wheel 10.0 / 80-12 – tire width 265mm,

– wheel shock absorber,

– breakers,

– moldings for extending the mouldboards,

– heel (pair),

– CAT coupling pins. III,

– smooth cut ø 420 mm with screw protection,

– blade with a chisel,

– mechanical adjustment of the first furrow,

– frame tilt cylinder and for transport with memory,

– ‘HYDRO TRANS SETTING’ regulation and transport system,

– multi-functional key,

– 330 bar two-line hydraulic hoses,

– hydraulic cylinder locks,

– 1 pair of hydraulic outlets required (VARIO – 2 pairs),

– stone protection – screw.

– 4 sections of split plates – arranged in the shape of the letter “X”,

– 40x40mm disc shafts axis,

– the front disc sections overlap – it does not require a middle tooth,

  – disc angle adjustment – point, 

– 23.5 cm transverse pitch

– front toothed discs ø 660×6 mm,

– rear section of the plates smooth ø 660×6 mm,

– end plates on the front sections (1pc + 1pc) – STARS,

  – end plates on rear sections with smaller diameter (1pc + 1pc),

– plate scrapers, 

– metal bearing covers, 

– hydraulically raised transport wheels 11.5 / 80-15.3 – SMALL FRAME,

– hydraulically raised transport wheels 14.5 / 80-18 – LARGE FRAME,

 – hydraulically folding cultivating rollers for transport (if any), 

– mechanical blocking of rollers during transport, 

– hydraulic accumulators for cylinders, 

– drawbar height adjustment, 

– extraction – adjustment of the machine level, 

– extraction spring, 

– vibration damping, 

– mechanical memory of working depth,

– air brakes (only DR frame),

– eye hook ø 40 mm, 

– 330 bar two-line hydraulic hoses,

– 1 pair of hydraulic outlets required

– hydraulic locks of all cylinders (standard and optional).

– toothed disc ø 610×5 mm type II,

– spacing between rows of discs 100 cm,

– transverse pitch of 25 cm discs,

– mechanical adjustment of the angle of attack of the PATENT discs,

– mechanical adjustment of disc shafts relative to each other, 

– rubber protection for each plate 40×210 mm,

– maintenance-free bearings with cassette sealing,

– hydraulic depth adjustment on the shaft,

– mechanical memory of working depth,

– hydraulically folded for transport,

– hydraulic and mechanical shaft blocking in transport,

– longitudinal stiffening of the supports (5.0), (5.5m) and (6.0m),

– CAT coupling pins. III,

– transport width of 2.5 m,

– 330 bar two-line hydraulic hoses,

– hydraulic locks of all cylinders (standard and optional).

Additionally in the DRAWN VERSION:

– hydraulic accumulators for cylinders,

– LED lighting – at the back,

  – hydraulically raised transport wheels 500 / 50-17 – tire width 50cm,

– two-circuit pneumatic brakes,

– CAT drawbeam. III – L = 825, 

– 2 pairs of hydraulic outlets required (suspended version),

– 3 pairs of hydraulic outlets required (towed version).

4 rows of teeth type “S” (32x10mm) with eye reinforcement + goose feet (width 10 cm)

– front flat bar Ø 280mm,

– rear double string roller Ø 280mm with adjustable pressure,

– CAT coupling pins. II and III,

– hydraulically folded for transport – 2 cylinders,

– mechanical blockade in transport

– transport width of 2.5 m,

– 330 bar two-line hydraulic hoses,

– 1 pair of hydraulic outlets required.